?unique=c26756c)
APD 4930 Series Iso Splitter® DC to DC Signal Splitter/Transmitter/Isolator, Factory Ranged, DIN Rail Mount
The APD 4930 IsoSplitter accepts a DC voltage or current
input and provides two optically isolated DC voltage or current
outputs that are linearly related to the input. The input range
and each output range are independent and can be specified as
required. This provides an economical solution when one signal
must be sent to two different devices.
Typical applications include isolation, output splitting, output
device separation and redundancy (i.e. to prevent failure of
the entire loop if one device fails), or a combination of these.
The input signal is filtered, amplified, split, and then passed through an opto-coupler to the output stages. Full 4-way isolation (input, output 1, output 2, power) make this module useful for ground loop elimination, common mode signal rejection, and noise pickup reduction.
Features:
- 1 Input: 0-100 mV to 0-300 V, ±100 mV to ±10 V, 0-1 mA to 0-1000 mA, 4-20 mA
- 2 Outputs: 0-1 V to 0-10 V, optional up to 20 V, ±1 V to ±10 V, 0-1 mA to 20 mA, 4-20 mA
- Zero and Span Output Calibration Potentiometers
- Full 1200 V Input/Output /Power Isolation
- Output LoopTracker® LEDs
- Output Test/Manual Override for Each Channel
- Built-In Loop Power Supply for Sink/Source Input
The APD 4930 IsoSplitter accepts a DC voltage or current
input and provides two optically isolated DC voltage or current
outputs that are linearly related to the input. The input range
and each output range are independent and can be specified as
required. This provides an economical solution when one signal
must be sent to two different devices.
Typical applications include isolation, output splitting, output
device separation and redundancy (i.e. to prevent failure of
the entire loop if one device fails), or a combination of these.
The input signal is filtered, amplified, split, and then passed through an opto-coupler to the output stages. Full 4-way isolation (input, output 1, output 2, power) make this module useful for ground loop elimination, common mode signal rejection, and noise pickup reduction.
Features:
- 1 Input: 0-100 mV to 0-300 V, ±100 mV to ±10 V, 0-1 mA to 0-1000 mA, 4-20 mA
- 2 Outputs: 0-1 V to 0-10 V, optional up to 20 V, ±1 V to ±10 V, 0-1 mA to 20 mA, 4-20 mA
- Zero and Span Output Calibration Potentiometers
- Full 1200 V Input/Output /Power Isolation
- Output LoopTracker® LEDs
- Output Test/Manual Override for Each Channel
- Built-In Loop Power Supply for Sink/Source Input
Specifications
| Power | 85-265 VAC, 60-300 VDC, [D] 9-30 VDC, 10-32 VAC |
| DC Input Range | Voltage: 0-100 mVDC to 0-300 VDC, Bipolar: ±100 mVDC to ±10 VDC, Current: 0-1 mADC to 0-1000 mADC |
| Channel 1 Output Range | Voltage: 0-1 VDC to 0-10 VDC, 10 mA max Up to 20 VDC with M19, M29, M39, Bipolar Voltage: ±1 VDC to ±10 VDC, Current: 0-1 mADC to 0-20 mADC, 4-20 mADC 20 V compliance, 1000 Ω at 20 mA |
| Channel 2 Output Range | Voltage: 0-1 VDC to 0-10 VDC, 10 mA max Up to 20 VDC with M19, M29, M39, Bipolar Voltage: ±1 VDC to ±10 VDC, Current: 0-1 mADC to 0-20 mADC, 4-20 mADC 20 V compliance, 1000 Ω at 20 mA |
| Optional Channel Sinking mA Output Channel 1 | Without, [EXT1] Sinking mA Output Channel 1 |
| Optional Channel Sinking mA Output Channel 2 | Without, [EXT2] Sinking mA Output Channel 1 |
| Optional Channel Sinking mA Output Channels 1 & 2 | Without, [EXT2] Sinking mA Output Channels 1 & 2 |
| Optional Channel 1 High Voltage Output | Without, [M19] Channel 1 High Voltage Output |
| Optional Channel 2 High Voltage Output | Without, [M29] Channel 2 High Voltage Output |
| Optional Channels 1 & 2 High Voltage Output | Without, [M39] Channels 1 & 2 High Voltage Output |
| Optional Conformal Coating | Without, [U] Conformal Coating |